TAMB Telephone Paging System Inteface Module (Has Been Replaced by TAMB2 No Longer Available)

Printer Friendly
TAMB Telephone Paging System Inteface Module (Has Been Replaced by TAMB2 No Longer Available)
No longer available. See TAMB2

Model # TAMB

Your Cost: Call 1-800-335-0229 Ext. 152 For Quote

Product Description

If you need to connect your phone system to a paging system the TAMB is what you need.The TAMB interfaces a telephone system with a paging system allowing announcements to be made through any telephone. Any of three types of analog ports can be connected using theTAMB: loop start trunk, ground start trunk, station port or VoIP FXO port. (90V ring up). This wide range of port compatibility makes the TAMB indispensable for any telephone paging application because it eliminates the possibility of mismatching paging interfaces and port types.

Product Features

  • Loop start, ground start, and station port (90V ring up) compatibility
  • 600-ohm output
  • Built-in confirmation tone indicating access to paging system (defeatable)
  • Built-in pre-announce tone produced over paging system before announcement (defeatable)
  • Adjustable tone volume
  • Works with one-way and two-way (talkback) zones
  • Background music input with volume control
  • Suppresses background music during paging
  • Station access disconnect is dynamically controlled using a combination of disconnect timer, silence interval timer, and Calling Party Control (CPC) signal detection
  • Disconnect timer is adjustable from 6 to 35 seconds (defeatable)
  • Silence interval timer is adjustable from 2 to 6 seconds of silence
  • Calling Party Control (CPC) signal from switch immediately disconnects station port
  • No power supply needed for station port interfacing
  • 1 normally open contact pair available for operating external equipment
  • Punch-block connections (type 66)
  • Wall-mount design
  • FCC Part 68 approved