V250 Power Amplifier

V250 Modular Mixer Power Amplifier 250W by Bogen

Model #V250

Regular Price: $1,789.26

Special Price $939.36

Product Overview


  • 250W with a large power reserve

  • 4-ohm, 8-ohm, 25V, & 70V outputs

  • 8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules

  • Four priority levels

  • Rack mountable w/ kit (sold separately)

Details

The V250 Modular Mixer Power Amplifier 250W by Bogen from Power Vector series is designed to work with both high impedance and low impedance speaker systems (70V/25V, 4ohm / 8ohm). Includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. 

SPECIFICATIONS

  • Power Output (RMS): 
    Rated:250W
    Typical @ 1 kHz:*340W
  • Frequency Response
    Transformer: 45 Hz to 20 kHz; +0/-2 dB
    Direct: 20 Hz to 20 kHz; +0/-1 dB
  • Distortion
    Transformer: < 0.5%**
    Direct: < 0.1%** (.05 typical @ 1 kHz)
  • Signal-to-Noise†
    Fundamental: -94 dB
    With SAX1R Module: -70 dB
    With MIC1S Module: -60 dB
    With TEL1S Module: -70 dB
  • Tone Controls
    Bass Frequency: @100 Hz (+/- 10 dB minimum)
    Treble Frequency: @10 kHz (+/- 10 dB minimum)
    Low Cut Frequency: @125 Hz (-6 dB/octave)
  • Sensitivity 0.4V (at backplane connector)
  • Output Regulation: 2 dB or better, no load to full load
  • Output Impedance
    Transformer-Coupled: 70V, 25V, 8 ohms (bal or unbal)
    Direct Coupled: 4 ohms (minimum)
  • Thermal Emissions (BTU/hr.): 911.90
  • Inserts
    Insert "OUT" Level: 1VRMS (@FRP)
    Insert "OUT" Impedance: 50 ohms maximum
    Insert "IN" Sensitivity: 1VRMS
    Insert "IN" Impedance: 10k ohms minimum
  • Bridging In/Out
    Bus Level: 250 mVRMS (@FRP)
    Bus Impedance: 10k ohms maximum
  • Pre-EQ Output
    Output Level: 4VRMS (@FRP)
    Output Impedance: 50 ohms maximum
  • AC Power Receptacle: 500 watts maximum power, unswitched
  • AC Voltage: 120V AC, 60 Hz
  • AC Current: 5.5A
  • Product Weight (lb.): 32
  • Dimensions: 17-1/4" W x 3-7/8" H x 14-3/4" D (all models)


* Typical, @1 kHz/0.1% THD/4-ohm direct ** THD+N, Maximum, Full bandwidth @ FRP † Referenced to FRP output level, 20 Hz to 20 kHz bandwidth limited

Additional Information

Promotional Message No
SKU V250
Mount Type No

Write Your Own Review

You're reviewing: V250 Modular Mixer Power Amplifier 250W by Bogen

Documents