WV150

Bogen WV150 Power Amplifier 150W Wall Mount

Model #WV150

Regular Price: $2,303.07

Special Price $1,209.11

Be the first to review this product

Order by Phone: 800-335-0229

100% Money Back Promise

Product Overview



  • 150-watt models, with a large power reserve

  • Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads

  • 8 module bays

  • Wide selection of advanced plug-in modules

  • 2 module bays capable of handling signal processing plug-in output modules

  • 4 levels of priority between modules

  • 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch

  • Adjustable output level limiter with limit indicator

  • Tape output available on front of unit

  • Optional front-mounted input combo jack with 1/4" stereo phone and female XLR capabilities

  • Motorized master volume control can be remotely operated

  • Bass and treble controls with center detent

  • Two-color LED for each channel indicates input active/clipping

  • Switch permits user to select either transformercoupled outputs or a direct low-impedance output

  • Bass and treble control bypass switch (located in module bay 6)

  • 125 Hz Lo-cut feature (switch located in module bay 6)

  • 5-position barrier strip, with clamping washers, provides connections for speaker loads

  • Master mute function overrides all audio from the mixer section of the amplifier

  • Screw terminal for master mute and remote volume control functions

  • Each of the 8 module bays has an associated independent volume control

  • Remote volume control panel (RVCP) (sold separately)

  • Requires flush-mount (Model BBF) or surfacemount (Model BBS) back boxes (sold separately)

  • Requires front cover door (WMAD sold separately)

  • Listed to UL Standard 60065 for US and Canada

Details

The Bogen WV150 Power Amplifier 150W Wall Mount is designed to work with both high impedance speakers systems and low impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules.

Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

SPECIFICATIONS

  • Power Output (RMS)
    150W (200W Typical, @1 kHz/0.1%/4W)
  • Frequency Response
    Transformer: 45 Hz to 20 kHz; 0/-2 dB @ FRP
    Direct: 20 Hz to 20 kHz; 0/-1 dB @ FRP
  • Distortion
    Transformer: 0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
    Direct: 0.1% THD+N, Maximum,
  • Full-rated bandwidth @ FRP
    Signal-to-Noise
    Fundamental: -94 dB*
    With Aux Module: -70 dB*
    With Mic Module: -60 dB*
    With Tel Module: -70 dB*
  • Tone Controls
    Bass Frequency: 100 Hz (+/- 10 dB minimum)
    Treble Frequency: 10 kHz (+/- 10 dB minimum)
    Low Cut Frequency: 125 Hz @ -6 dB/octave
  • Sensitivity: 0.4V (at backplane connector)
  • Output Regulation: 2 dB or better, no load to full load
  • Output Impedance
    Transformer-Coupled: 70V, 25V, 8 ohms; balanced or unbalanced
    Direct Coupled: 4 ohms unbalanced
  • Tape Out
    Output Level: 4 VRMS @ FRP
    Output Impedance: 50 ohms maximum
  • Overload Protection: Electronic overload protection (auto reset)
  • Thermal Protection: Thermistor attached to heat sink
  • Line Fusing: Resettable circuit breaker
  • Cooling: Thermally controlled 3-speed fan
  • Power Consumption:
    WV150: 3.5A @ 120V AC, 60 Hz
  • Thermal Emissions:
    WV150: 696.7 BTU/hr
  • Dimensions:
    14-1/8" W x 21" H
  • Product Weight:
    29 lb.

Additional Information

Promotional Message No
SKU WV150
Mount Type No

Write Your Own Review

You're reviewing: Bogen WV150 Power Amplifier 150W Wall Mount

Documents