Details
The MIC2X Bogen Mic Input Module Electronically Balanced is designed with an electronically-balanced input with XLR connector.
It interfaces with low-impedance dynamic microphones and electret condenser microphones and shall have an internal 24V DC phantom power supply to provide the bias supply that is enabled by a PCB jumper.
The module has a gain control that will allow the gain to be adjusted from 18 dB to 62 dB. It also has the ability to mute lower priority modules and be muted by higher priority modules.
SPECIFICATIONS
- Gain 18 dB to 62 dB
- Frequency Response +0/-3 dB, 10 Hz - 40 kHz
- S/N (20 Hz - 20 kHz) -73 dBV @ 60 dB gain,
- -133 dBV EIN
- Distortion < 0.02%, 20 Hz - 20 kHz
- Input Impedance 2K ohms
- Tone -10 dB @ 100 Hz & 3 kHz
- (cut only)
- Limit (threshold) -10 dBV to off
- Gate Threshold 3 mV to 30 mV
- CMRR > 80 dB @ 1 kHz
- Priority Four levels
- Phantom Power 24V DC (defeatable)
- Controls Gain, Low Cut, High Cut,
- Enhance, Limit, Gate Threshold
- Connector XLR
- Dimensions 1-3/8" W x 3-1/8" H x 3-1/2" D
- Weight 2.2 oz.
Additional Information
| Promotional Message | No |
|---|---|
| SKU | MIC2X |