Details
The TBL1S Amplifier Transformer Balanced AUX input module by Bogen is a transformer-isolated, line-level, balanced input module. It has a pluggable 3-pin screw terminal input barrier strip connector to make the input connection.
The module is able to assume any of 4 priority levels. The module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with controls for threshold and duration. It also has a continuously variable ducking control that will enable attenuation of the input signal from a minimum of -10 dB to a maximum of - 72 dB relative to the normal unmuted condition and a gradual fade back from mute when the mute or gate control is deactivated. The module’s output is assignable to either or both of two mixing buses.
The module has a jumper-selectable input impedance of 600 ohms or 10k ohms. The module also has a gain/trim control that will allow the gain to be adjusted from -11 dB to +19 dB. It has the ability to mute lower priority modules and be muted by higher priority modules.
- Gain -11 dB to +19 dB
- Frequency Response 10 - 40 kHz (+0/-3 dB)
- S/N (20 Hz - 20 kHz) -75 dBV
- Distortion < 0.3%, 20 Hz - 20 kHz @ 1V
- Input Impedance 10k ohms/600 ohms (jumper selectable)
- Gate Threshold 5 mV to disable
- Gate Duration 0.5s to 5s
- Priority Four levels
- Duck Level -10 dB to -72 dB
- Tone +/- 10 dB @ 100 Hz & 10 kHz
- CMRR > 80 dB @ 1 kHz
- Controls Gain, Bass, Treble, Duck, Gate Threshold, Gate Duration
- Connector Pluggable Euro Screw Type
- Dimensions 1-3/8" W x 3-1/8" H x 3-1/2" D
- Weight 3.8 oz.
Additional Information
Promotional Message | No |
---|---|
SKU | TBL1S |