TEL1S

TEL1S Bogen Telephone Interface Module

Model #TEL1S

Regular Price: $174.88

Special Price $91.81

Product Overview


  • Dry loop interface to paging ports

  • Audio-activated paging in dry loop

  • Noise gate w/Threshold & Duration

  • Mute send & receive

  • 4 Priority levels

  • Bus assignable

  • Gain/Trim control

  • Limiter

  • Transformer-isolated

  • Screw terminal connections

  • Loop start or ground start trunk interfacing
    (requires external power supply; PRS48)

Details

The TEL1S Bogen Telephone Interface Module is a balanced input and configuration jumper that will allow the system to interface with both active and inactive telephone systems. 

The module has a 6- pin screw terminal input barrier strip connector to make the input connection. It provides for the connection of an external talk-battery power supply of 48V DC. The module also has a gain control that will allow the gain to be adjusted from 0 dB to 30 dB. It has he ability to mute lower priority modules and be muted by higher priority modules.

The TEL1S is able to assume any of 4 priority levels. This module has a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with controls for threshold and duration. It has a built in limiter, with a threshold control, to limit the maximum output level of the module. The module’s output is assignable to either or both of two mixing buses.

SPECIFICATIONS

  • Gain 0 dB to 30 dB
  • Frequency Response +0/-3 dB, 20 Hz - 20 kHz
  • S/N (20 Hz - 20 kHz) -90 dBV @ 30 dB of gain,
  • -120 dBV EIN
  • Limit (threshold) -10 dBV to off
  • Gate Threshold 3 mV to 30 mV
  • Gate Duration 0.5s to 5s
  • Distortion < 0.1%, 20 Hz - 20 kHz
  • Input Impedance Dry loop 30k ohms,
  • Wet loop 1k ohms
  • Priority Four levels
  • External Power 48V DC (for talk battery)
  • CMRR > 80 dB @ 1 kHz
  • Controls Gain, Limit,
  • Gate Threshold,
  • Gate Duration
  • Connector 6-position barrier strip
  • Dimensions 1-3/8" W x 3-1/8" H x 3-1/2" D
  • Weight 2.8 oz.

Additional Information

Promotional Message No
SKU TEL1S
Mount Type No

Write Your Own Review

You're reviewing: TEL1S Bogen Telephone Interface Module

Documents