TG4C Tone Generator for Paging System by Bogen

The TG4C Tone Generator for Paging System by Bogen is a compact and reliable unit designed to generate four distinct paging system alarm signals:

• pulsed tone
• slow whoop
• repeating chime
• steady tone

The TG4C will accept a Hi-Z input from a program source, such as a tuner, turntable, CD player, etc., and will maintain precedence over the program material for the duration of the contact closure.

SPECIFICATIONS 

• Rated Output: 1 volt RMS
• Load Impedance: 600 ohms or higher
• Signal Specifications
  -Pulsed: Square wave with cycle On/Off timing of 1.2 seconds on, 0.4 seconds off, 1.6 seconds on, and frequency range of 650-1300 Hz
  -Slow Whoop: Slowly ascending, low to high swept signal with cycle On/Off timing of 1.2 seconds on, 0.4 seconds off, 1.6 seconds on, and frequency range of 500-1200 Hz
• Dimensions: 6-3/4" W x 5-3/4" H x 2" D
• Product Weight: 2 lb.
• Finish: Silver gray
• Chime: Signal with exponential decay slope of 6.5 seconds, cycle On/Off timing of 0.3 seconds on, 0.7 seconds off, and frequency range of 650-1300 Hz
• Steady: Square wave with adjustable frequency range of 650-1300 Hz
• Modes of Operation: Choice of continuous signal (until interrupted) of any of four types or two bursts of pulsed, slow whoop, or chime tone
• Controls: Tone Level, Pitch
• Termination: Screw terminals
• Semiconductors: 7 ICs, 4 transistors, 21 diodes
• Power Requirements: 12-48V DC (30 mA @ 24V DC), positive or negative ground
• Associated Equipment: Model PRS40C 120V AC, 60 Hz Power Supply; Model WMT1A Line-Matching Transformer