Bogen Wall Mount Power Vector Amplifier 100W

Bogen Wall Mount Power Vector Amplifier 100W

Model #WV100

Regular Price: $2,072.49

Special Price $1,088.05

Product Overview

***OPEN BOX SPECIAL. Short Time Only. Bogen Factory Resealed, NOT REFURBISHED. This is a NEW AMP. 2 Year Warranty from date of purchase.***

Details

Bogen WV100 Wall-Mount Power Vector modular amplifiers offer a 100W power. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).
  • One Year Warranty
  • 30 Day Money Back Guarantee
  • FREE SHIPPING
  • Call Us At 1-800-335-0229

Additional Information

SKU WV100
Sound Quality No
Product Features Power Output (RMS) 100W (140W Typical, @1 kHz/0.1%/4W) Frequency Response Transformer: 45 Hz to 20 kHz; 0/-2 dB @ FRP Direct: 20 Hz to 20 kHz; 0/-1 dB @ FRP Distortion Transformer: 0.5% THD+N, Maximum, Full-rated bandwidth @ FRP Direct: 0.1% THD+N, Maximum, Full-rated bandwidth @ FRP Signal-to-Noise Fundamental: -94 dB* With Aux Module: -70 dB* With Mic Module: -60 dB* With Tel Module: -70 dB* Tone Controls Bass Frequency: 100 Hz (+/- 10 dB minimum) Treble Frequency: 10 kHz (+/- 10 dB minimum) Low Cut Frequency: 125 Hz @ -6 dB/octave Sensitivity: 0.4V (at backplane connector) Output Regulation: 2 dB or better, no load to full load Output Impedance Transformer-Coupled: 70V, 25V, 8 ohms; balanced or unbalanced Direct Coupled: 4 ohms unbalanced Tape Out Output Level: 4 VRMS @ FRP Output Impedance: 50 ohms maximum Overload Protection: Electronic overload protection (auto reset) Thermal Protection: Thermistor attached to heat sink Line Fusing: Resettable circuit breaker Cooling: Thermally controlled 3-speed fan Power Consumption: 2.0A @ 120V AC, 60 Hz Thermal Emissions: 495.2 BTU/hr. Dimensions: 14-1/8" W x 21" H Product Weight: 27 lb.

Write Your Own Review

You're reviewing: Bogen Wall Mount Power Vector Amplifier 100W

Documents