Simple Network Management Protocol

Model #SNMP-NV6 Card


Product Overview

  • Compatible with the EnterprisePlus, Endeavor, and PRO-RT Series

  • Network connection through RJ45 connector - Allows connection of the UPS directly to the Ethernet network through a RJ45 connector without using RS232 or USB ports on the computer and without loading any individual UPS management software on the network server.

  • Network UPS management - Allows remote management of the UPS from any workstation through Internet or Intranet.

  • NEW IPv6 Capability - Full compatibility with both IPv4 and IPv6 standards making it the perfect card for future migration options

  • NEW Versatile Communications - Compatible with SNMPv1, v2C, and v3 protocols.

  • NEW Supports SYSLOG - can send messages to a maximum of four Syslog servers when an event occurs

  • NEW Configurable Event Alarm Levels - user configurable alarms levels for various events

  • NEW Adjustable Low Battery Warning Alarm - user configurable to define an event threshold

  • NEW Batch Configurations and Upgrades - save time by configuring or updating firmware and pushing those changes to multiple cards over the network

  • Remote UPS monitoring via SNMP, HTTP - Allows monitoring of the UPS using the MIB (Management Information Base), or an Internet Browser.

  • Configure UPS and system functions from any client (password protected) - Configure the UPS and the system parameters from any SNMP management station or through an Internet Browsers using HTTP forms and objects.

  • Event logs & Metering data stored in the EEPROM - Provides historical data of UPS’ power events, power quality, current status and battery condition.

  • Multiple server shutdown - The SNMP management software included provides an automatic shutdown of servers through a schedule pre-programmed by an administrator or when critical power events occur.

  • Notification of users via SNMP Traps and e-mail through SMTP

  • Network Time Protocol supported

  • Telnet support for configuration

  • BOOTP/DHCP supported

  • NetBIOS Name Service supported

  • MD5 HTTP security


The SNMP-NV6 card is designed for management and control of a UPS on a LAN. It is compatible with the EnterprisePlus, Endeavor, and PRO-RT Series. The SNMP-NV6 card is an interface between the UPS and the network. It can obtain the information from a UPS and issue commands to it. SNMP-NV6 card supports two kinds of protocols – SNMP and HTTP for user access. Through the SNMP NMS and Web Browser, the user can setup the SNMP-NV6 card obtain information from the UPS and issue commands to UPS.

Additional Information

Promotional Message No
Mount Type N/A

Write Your Own Review

You're reviewing: Simple Network Management Protocol