X300

  • X300
  • X300 Power Amplifier

Bogen X300 Power Amplifier with 600 Watts of Total Power

Model #X300

Regular Price: $2,107.14

Special Price $1,106.25

Product Overview

***OPEN BOX SPECIAL. Short Time Only. Bogen Factory Resealed, NOT REFURBISHED. This is a NEW AMP. 2 Year Warranty from date of purchase.***



  • Built-in Power Sequencing Inputs eliminate current in-rush problems of large audio systems with multiple amplifiers.

  • Auto Sleep Mode reduces the power consumption of continuously powered systems when there is no input activity.

  • Back-SlopeTM AC Voltage Stabilization circuitry assures consistent performance and reliability by regulating the proper amount of AC energy to the amplifier despite varying AC line voltages and load conditions.

  • Low noise, low distortion, and high slew rate

  • Continuously variable speed cooling fans

  • DC, overload, short circuit, and thermal protection circuits

  • Clip limiting circuits for speaker protection

  • Heavy-gauge steel chassis with cast aluminum front panel

Details

The Bogen X300 Power Amplifier is designed to provide maximum audio performance in constant 70V speaker systems.Up to 600 watts of total output power on two separate channels of audio are available in a single unit.

Dual 70V transformerless outputs deliver exceptionally clean, full bandwidth audio to speaker systems. 

High efficiency class H amplifier design and auto-sleep feature save power consumption on continuously-powered systems. Specifically designed for the fixed install market with features like: rear-mounted volume controls, independent Low Cut filters, independent input sensitivity switches, input channel link switch, and pluggable input screw terminals.

SPECIFICATIONS

  • Power Output: 300W per channel @ 70V
  • Input Sensitivity: 1V/0.1V
  • S/N Ratio: (20k BW) 104 dB ref. 70V, F.P.
  • Class of Operation: H
  • Product Weight: 41 lb.
  • Connectors
    Power: 15A line cord
    Input: Pluggable 3-pin screw terminal strips
    Output: 5-pin "touch-proof" screw terminal barrier strip
  • Power Bandwidth: 20-40 kHz < .5% THD
  • THD @ 1 kHz rated power: less than .02%
  • Rated Load Impedance: 16 ohms
  • Frequency Response @ 1 watt: 20 Hz to 20 kHz +/- 0.25 dB
  • Output Regulation, 1 kHz direct: 1.5 dB @ 70V
  • Inputs: 10k-ohm electronically balanced, 3-pin pluggable screw terminal strips
  • Low Cut Filter: 60 Hz, 2nd order roll-off, switch defeatable per channel
  • AC Input Voltage Range: 95-130V AC, 60Hz
  • Maximum AC Current: 12A
  • Indicators: Status, Signal, Limit, AC Power Status (rear)
  • Temperature Range 15 to 105° F
  • Thermal Emissions (Full Power): 1195 BTU/hr
  • Cooling: Dual Forced Air Variable Speed Fan
  • Physical Dimensions: (W x H x D) 17" X 3-1/2" x 18-1/4" (without rack mount brackets attached)
  • Protection: RF, DC, Low-frequency, Thermal, Low-Impedance, Short Circuit, Circuit-Breaker, Clip Limiting
  • Special Features: Sequential Turn-On Circuitry (defeatable), Sleep Mode (defeatable), Back-Slope™ AC voltage regulation, Toroidal Power Transformer, Input Sens, CHB Input Select

Additional Information

Promotional Message No
SKU X300
Mount Type No

Write Your Own Review

You're reviewing: Bogen X300 Power Amplifier with 600 Watts of Total Power

Documents