TPU600-G2 Telephone Paging Amplifier 600W by Bogen

The TPU600-G2 Telephone Paging Amplifier 600W by Bogen is a second generation TPU amplifier that provides inputs for 600 Ohm paging telephone signal, background music, low impedance microphones and dry loop phone lines, with a built-in night ringer to convert the paging system into an after-hours night bell alert system.

Music is automatically muted when a paging announcement is made! The mute level for background music during a page is adjustable, and the music then gradually fades back in after the page is completed. 

An Audio Enhancement feature is also provided to improve the clarity of the output signal by reintroducing the higher frequency harmonics that are normally lost through the telephone system. Bass and treble controls are provided for adjusting the quality of the output signal.

This model can be wall mounted or rack mounted. 

SPECIFICATIONS

• Power Output: ..........................................600W RMS
• Frequency Response:............................20 Hz to 22 kHz ±1 dB
• Sensitivity: .................................................Music: 250mV; Tel: -14 dBm (170mV); MIC: -50dBv (3.1mV); E.I.N. -119dBv.
• Distortion: ..................................................Less than 1%
• Hum & Noise:.............................................(20 Hz to 20 kHz) Music: -54 dB; TEL: -54 dB; MIC: -50 dB
• Tone Control:.............................................Bass: ±9 dB @ 100 Hz; Treble: ±9 dB @ 10 kHz
• Inputs (all via pluggable Phoenix style connectors):
  Tel:................................................................600-ohm balanced line, transformer-isolated
  Music: .........................................................Hi-Z source
  Mic: ..............................................................Lo-Z balanced (dynamic only)
  Music Mute: .............................................Mutes music when shorted
  Contact Ring: ..........................................Sounds night ringer tone when customer-supplied dry contacts are closed
  Tel Ring:......................................................Sounds night ringer in response to 90V ring signal
  Bridging: ....................................................Permits bridging of two amplifiers to increase the total output power
• Outputs:
  Speaker: .....................................................8-ohm, 25V, 70V
  Balanced Line Level:..............................600-ohm Telephone line
• Controls & Indicators:................. CLIP, PROTECT, POWER, and LIMIT LEVEL LED indicators. ENHANCE, TREBLE, BASS, VOX SENS, RINGER VOLUME, MUSIC MUTE, MUSIC VOLUME, MIC VOLUME, TEL VOLUME, ALC controls
• Overload Protection:.............................All models have thermal and electronic overload protection
• Power Requirements:............................100-240VAC, 50/60 Hz, 6.0A
• Thermal Emissions at Full Power:............................................... 294 BTU/hr.
• Dimensions*:............................................. 8.00” W x 3.43” H x 13.48” D
• Product Weight:............................ 6.2 lbs.

* Depth Includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet.