Viking Plain Red VoIP Emergency Phone E-1600-40-IP

E-1600-40-IP Simple Red Emergency VoIP Phone by Viking Electronics

Model #E-1600-40-IP

Regular Price: $750.00

Special Price $509.10

Product Overview


  • Designed for emergency applications in elevators, ATM Machines, medical centers, lobbies, etc

  • Automatic polling and programming software included

  • 2 Amp relay contacts to control an SL-2 Strobe Light (DOD 242) or LV-1K Line Verification Panel (DOD 246)

  • Red “Call Connected” LED indicator

  • SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)

  • PoE powered (class 1, <4 Watts)

  • Automatic Noise Canceling (ANC) feature for proper operation in noisy environments

  • VoIP audio detection eliminates the need for “Push to Talk” mode

  • Network downloadable firmware

  • Handsfree operation

  • Meets ADA requirements for Emergency Phones:

    • Automatically lights the “Call Connected” LED

    • Transmits a unique location ID code or voice announcement

    • Grade 2 Braille label for the visually impaired



  • Non-volatile digital voice announcer with 28 seconds of voice memory

  • Programmable to dial up to 5 numbers

  • Cycles through backup phone numbers on busy or ring-no-answer

  • Hangs up on busy signal, time-out or touch tone command

  • Remotely programmable

  • Diagnostics for testing mic, speaker, relay

  • Extended temperature range: -40°F to 140°F (-40°C to 60°C)

Details

The E-1600-40-IP Simple Red Emergency VoIP Phone by Viking Electronics is a reliable and strong, vandal resistant emergency VoIP phone designed for multiple applications. 

The E-1600-40-IP ADA and CE Compliant VoIP Red Emergency Phone is designed to provide quick and reliable handsfree communication for SIP VoIP phone systems with PoE. The E-1600-40-IP phone meets ADA requirements for elevator / emergency telephones, and can be programmed from any touch tone phone, PC on the same LAN, or remotely using a static IP address. The VoIP red emergency phones can dial up to 5 programmable emergency numbers.

The E-1600-40-IP phone can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF touch tone code may also be delivered. A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and location numbers, are stored in non-volatile memory, requiring no batteries. All units are PoE powered.

APPLICATIONS

  • Elevators
  • Parking ramps / lots
  • Emergency pool phones
  • ATM machines
  • Medical centers
  • Silent hold-up alarm dialer when used with a Viking PB-1 Panic Button Kit (DOD 233)
  • Area of refuge locations
  • Lobbies
  • Entryways
  • Campus emergency stations
  • Stadiums
  • Convention centers
  • Public access areas

SPECIFICATIONS

Power PoE class 1 (<4 Watts)
Dimensions 5.25″ x 4.0″ x 2.0″ (133mm x 102mm x 51mm)
Shipping Weight 2.5 lbs (1.13 kg)
Operating Temperature -40°F to 140°F (-40°C to 60°C)
Humidity 5% to 95% non-condensing
Material 16 gauge steel with textured red powder paint
Maximum Sound Pressure 90dB SPL @ 1m
SPDT Relay Contact Rating 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum
Audio Codecs G711u, G711a, G722
Network Compliance IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Mounting Surface mount to walls, posts, single gang boxes, or 4″ x 4″ electrical junction boxes
recess mount in elevator phone boxes
Connections (1) RJ45 10 / 100 Base-T, (3) gel-filled butt connectors

Additional Information

Promotional Message No
SKU E-1600-40-IP
Mount Type No

Write Your Own Review

You're reviewing: E-1600-40-IP Simple Red Emergency VoIP Phone by Viking Electronics